JBL Tune Beam 2
Key Specification
-
Configurations TWS, Dynamic -
Connnector type Bluetooth 5.3 / USB-C -
Battery 65mAh (buds), 590mAh (case) -
Driver Type 10mm
Pros
Cons| Configurations | : | TWS |
| Memory Card Supported | : | No |
| Driver type | : | Dynamic |
| Connector type | : | Bluetooth 5.3 / USB-C |
| USB Port | : | Yes (Type-C) |
| Battery | : | Li-ion |
| Power Output | : | 5V/1A |
| Charging time | : | 2h |
| Battery Capacity | : | 65mAh (buds), 590mAh (case) |
| Height | : | 33.4mm (earbud) / 61.5mm (case) |
| Width | : | 22.6mm (earbud) / 29.1mm (case) |
| Depth | : | 25mm (earbud) / 47mm (case) |
| Cable length | : | Not Applicable |
| Weight | : | 5.2g (earbud), 42g (case) |
| Bluetooth | : | Yes |
| Bluetooth Range | : | 10 Metre |
| Jack Available | : | No |
| Cable Connection | : | USB-C (charging) |
| Wired/ Wireless | : | Wireless |
| Memory Card Slot | : | No |
| Warranty Service Type | : | Manufacturer |
| Warranty Summary | : | Limited Warranty |
| Covered in Warranty | : | Manufacturing Defects |
| Not covered in Warranty | : | Physical Damage |
| Domestic Warranty | : | Yes |
| sub-wofer | : | No |
| Outdoor Usage | : | Yes (IP54) |
| Signal to Noise | : | 100dB |
| Driver Type | : | 10mm |
